Dentistry Journal

The systematic review assessed the efficacy and safety of propolis for treating recurrent aphthous stomatitis (RAS). The review adopted the PICO framework to examine the effects of topical and systemic propolis on RAS while also comparing it to established treatments, placebos, or no treatment. The main focus was on the healing time, pain levels, adverse effects, the likelihood of ulcer recurrence, and accompanying symptoms such as redness. The team included randomised controlled trials (RCTs) and quasi-randomised trials, excluding case reports and studies on oral ulcers other than RAS. In May 2022, the review team comprehensively searched nine databases and trial registries following the PRISMA guidelines. The protocol was registered in the PROSPERO database under the registration number CRD42022327123. Two review authors conducted a comprehensive and autonomous search for pertinent papers and extracted essential data. Where data permitted, the team utilised Review Manager 5 to conduct a random-effects meta-analysis, assessing the risk of bias and heterogeneity of the included studies. Where possible, the GRADE Pro programme was used to assess the certainty of the evidence for all the outcomes. This review included 10 RCTs, comprising 825 participants aged between 18 and 69 years. Seven studies evaluated the efficacy and safety of propolis when applied topically, all of which used different formulations, concentrations, and carriers. The remaining three studies assessed systemic administration in tablet form. The duration of investigations ranged from 5 days to 3 years. The review team classified two studies as having an overall ‘high risk’ of bias, while the remaining studies were categorised as having an overall ‘uncertain risk’. The overall certainty of the evidence was ‘very low’. The results indicate that topical and systemic propolis may decrease the duration of healing, alleviate pain, and reduce redness in patients with RAS compared to a placebo. However, the certainty of the evidence is very low. These may be due to the high risk of bias, substantial heterogeneity, and limited sample sizes in the included studies. For these reasons, the results of this review should be interpreted with caution. Nevertheless, the limited number of adverse effects observed suggests that propolis may have a favourable safety profile when used for a short period in treating RAS. Full article

The aim of the present work was to investigate the upper airway dimensions in adult non-orthodontic patients, equally divided according to their skeletal class. Methods: In this retrospective cross-sectional study, lateral cephalometric radiographs of adult patients referred for orthodontic consultation were collected. Cephalometric tracing was performed with dedicated software. For each measure, descriptive statistics were calculated. Cephalometric measurements between the different skeletal classes were compared. Linear regressions were performed between upper airway diameters and cephalometric measurements, sex and age. Significance was predetermined for p < 0.05. Results: Lateral cephalometric radiographs of 120 patients were reviewed. Nasopharynx length (NL) and depth (PD) measurements were significantly shorter in skeletal class III patients (p < 0.05). The superior pharyngeal airway space (SPAS) was found to be significantly shorter in class III patients as compared to class II patients (p < 0.05), and the mean airway space (MAS) of class I patients was found to be significantly shorter compared to class II patients (p < 0.05). Palate length (PL) values were found to be significantly longer in class I (p < 0.05). Linear regressions showed that the sella-nasion-A point angle (SNA) and Riedel’s angle between point A, the nasion and point B (ANB) significantly influenced NL and PD (p < 0.05). Conclusions: Class III patients show significantly shorter nasopharynx measurements; clinicians should consider that this sagittal discrepancy could be related to an altered anatomy of the upper respiratory tract. Full article

Peri-implantitis is a growing concern and currently, there is no agreement on the best method for treating this condition. This study looked at surgical intervention with the use of enamel matrix derivative (EMD) for treating this condition. A cohort of 25 (34 implants) consecutive patients treated with EMD for peri-implantitis was followed for up to 6.4 years. The survival of the implants as well as changes in clinical parameters are reported. Statistical analysis was performed using paired t tests and general estimating equations. The mean length of time implants were followed post-surgery was 3.05 ± 1.53 years. All but two of the treated implants survived in function (94%). Both failed implants were lost in the same patient, who was a heavy smoker. The changes in mean probing depth (1.94 ± 1.18 mm), change in deepest probing depth (3.12 ± 1.45 mm), and reduction in bleeding on probing (73.6 ± 43.9%) according to patient means were all highly significant (p < 0.001 for all changes). When EMD is used during surgical treatment of peri-implantitis, there is a high survival rate of implants and significant improvements in clinical parameters. Full article

This study investigated the oral symptoms and subjective health perceptions of Korean adolescents due to COVID-19. Data from the 17th Korea Youth Risk Behavior Survey (KYRBS; 2021) were analyzed, and 54,848 Korean middle and high school students were included in the study. Frequency, cross-tabulation, and logistic regression analyses were performed using IBM SPSS (v. 22.0; IBM Corp., Armonk, NY, USA). Statistical significance was set at p < 0.05. The survey results on subjective health perception showed that 64.8% considered themselves “healthy”, 26.1% rated themselves “moderate” in health, and 9.26% rated themselves “unhealthy.” When asked about brushing their teeth after lunch at school, students answered “no” more frequently than “yes”. Participants provided significantly different responses to questions related to receiving “sealant treatment”, “having broken teeth”, “experiencing tooth pain when eating”, “having throbbing tooth pain”, and “having pain and bleeding in gums”. Regarding the relationship between oral symptoms and subjective health perceptions due to COVID-19, students perceived themselves as healthy when they had no throbbing tooth pain, risk of pain, bleeding in the gums, or symptoms of toothache when eating. Results reveal a relationship between oral symptoms and subjective health perceptions due to COVID-19. Thus, appropriate oral health management for adolescents is needed in response to the COVID-related changes. Full article

The basis of modern tooth whitening systems is the use of a whitening gel, which usually contains hydrogen peroxide or carbamide peroxide. The study included 81 patients aged 22 to 35 years with a tooth color A2 and a darker color on the Vita Classic scale. The purpose of our research was to identify a new approach to whitening teeth to improve safety and gentleness. To perform this, we assessed the effect of the tooth whitening procedure on the mineral composition of the oral fluid. A new approach to the teeth whitening procedure was to use a mouth retractor and a tool for aspirating the whitening gel, which we developed. Before the procedure, a protective film-forming aerosol, which included sodium ascorbate, was applied. After the tooth whitening procedure, the enamel was remineralized with a sealing liquid for 14 days. The concentrations of calcium and phosphorus in the oral fluid were determined using a spectrophotometer with a set of reagents (Human). The results obtained indicate that the new approach to the teeth whitening procedure contributed to less pronounced changes in the concentrations of calcium (+29.07, p < 0.001) and phosphorus (−14%, p < 0.001) in the oral fluid immediately after the procedure and in combination with the standard procedure for teeth whitening; immediately after this procedure, the calcium concentration increased by 74.4% (p < 0.001), and the phosphorus concentration decreased by 23.07% (p < 0.001). The use of remineralizing agents led to a faster recovery of the initial levels of calcium and phosphorus in the oral fluid. Full article

The popularity of implants is increasing with the aging population requiring oral–dental rehabilitation. There are several critical steps in the implant workflow, including case selection, implant design, surgical procedure, biological tissue responses, and functional restoration. Among these steps, surgical osteotomy procedures are a crucial determinant of clinical success. This brief review was aimed at outlining the current state of the field in automation-assisted implant surgical osteotomy technologies. A broad search of the literature was performed to identify current literature. The results are outlined in three broad categories: semi-automated static (image-guided) or dynamic (navigation-assisted) systems, and fully-automated robotic systems. As well as the current mechanical rotary approaches, the literature supporting the use of lasers in further refinement of these approaches is reviewed. The advantages and limitations of adopting autonomous technologies in practical clinical dental practices are discussed. In summary, advances in clinical technologies enable improved precision and efficacious clinical outcomes with implant dentistry. Hard-tissue lasers offer further advancements in precision, improved biological responses, and favorable clinical outcomes that require further investigation. Full article

Dentifrice performance in the removal of dental plaque is influenced by the interactions of dentifrice components with tooth surfaces. This randomized controlled clinical study assessed the effectiveness and safety of a novel fluoride dentifrice formulation that included a micro-fibrillated cellulose network with entangled microcrystalline cellulose and silica particles (Protegera^TM), and compared this to a positive control fluoride dentifrice (Crest Cavity Protection™). Whole mouth dental plaque levels in 82 healthy adults were measured after the first supervised use, and following a week of twice daily use at home. Overall, the test dentifrice was at least three times and up to four times more effective in whole-mouth plaque reductions, with a 38.6% reduction on first use, a 30.9% reduction at day 7, and a 41.6% reduction from day 1 to day 7, compared to reductions of 12.0%, 9.6% and 11.6%, respectively for the positive control, and up to seven times more effective in lingual plaque reductions, than the reference dentifrice (p < 0.001), with a 27.7% reduction on first use, a 22.3% reduction at day 7, and a 31.0% reduction from day 1 to day 7, compared to reductions of 4.4%, 2.2%, and 4.5%, respectively, for the positive control. No safety issues arose from the use of the test dentifrice. These results indicate that including micro-fibrillated cellulose enhances plaque removal effectiveness, without causing adverse changes to oral soft tissues. Full article

This study aimed to evaluate the awareness, comprehension, and practices concerning forensic odontology among dental students and faculty at a Dental School in Cyprus. An online, cross-sectional, descriptive survey, employing an adapted, self-administered questionnaire, was disseminated to all dental students and faculty at the School of Dentistry, European University Cyprus, in November 2022. The survey assessed participants’ demographic information and explored their awareness with questions alluding to knowledge, attitudes and practices in forensic dentistry. Of those surveyed, 47 faculty members and 304 students responded, yielding response rates of 66.2% and 80%, respectively. Statistical analysis, including Kendall’s tau test and χ² test were employed to examine correlations and associations, with Cramer’s V used to measure the strength of significant associations. The predetermined significance level was α = 0.05. Awareness levels were assessed through participants’ responses to specific questions in the survey. It was revealed that 87% of faculty and 65% of students were familiar with forensic odontology. A noteworthy 94% of faculty and 85% of students recognized teeth as DNA repositories. A high percentage, 98% of faculty and 89% of students, acknowledged the role of forensic odontology in the identification of criminals and deceased individuals. Awareness of age estimation through dental eruption patterns was evident in 85% of faculty and 81.6% of students. A substantial proportion (80% of faculty) maintained dental records, while 78% of students recognized the importance of dental record-keeping in ensuring quality care. Interestingly, 57% of students and 64% of faculty were aware of the possibility of dentists testifying as expert witnesses. The majority, 95.7% of faculty and 85% of students, concurred that physical harm, scars, and behavioral alterations predominantly indicate child abuse. The findings, revealing robust awareness among respondents, underscore the importance of enhancing faculty engagement in relevant seminars to further strengthen their knowledge. Additionally, emphasizing improved record-keeping practices for potential forensic applications emerges as a crucial aspect. These insights have implications for refining dental education in Cyprus and enhancing forensic practices by promoting ongoing professional development and emphasizing meticulous record-keeping within the dental community. Full article

This systematic review evaluated the potential clinical use of microfluidic lab-on-a-chip (LOC) technology in the identification and antibiotic susceptibility testing of E. faecalis in endodontic infections. The search methodology employed in this review adhered to the PRISMA guidelines. Multiple scientific databases, including PubMed/MEDLINE, SCOPUS, and SCIELO, were utilized, along with exploration of grey literature sources. Up to September 2023, these resources were searched using specific keywords and MeSH terms. An initial comprehensive search yielded 202 articles. Ultimately, this systematic review incorporated 12 studies. Out of these, seven aimed to identify E. faecalis, while the remaining five evaluated its susceptibility to different antibiotics. All studies observed that the newly developed microfluidic chip significantly reduces detection time compared to traditional methods. This enhanced speed is accompanied by a high degree of accuracy, efficiency, and sensitivity. Most research findings indicated that the entire process took anywhere from less than an hour to five hours. It is important to note that this approach bypasses the need for minimum inhibitory concentration measurements, as it does not rely on traditional methodologies. Microfluidic devices enable the rapid identification and accurate antimicrobial susceptibility testing of E. faecalis, which are crucial for timely diagnosis and treatment in endodontic infections. Full article

Background: Understanding predictors of pain associated with paediatric dental procedures could play an important role in preventing loss of cooperation, which often leads to the procedure having to be performed under general anaesthesia. Aim: We aimed to identify predictors of intra-operative and post-operative pain associated with routine dental procedures in children. Materials and Methods: A systematic review of observational studies was performed using electronic searches on MEDLINE, EMBASE, PsycINFO, Global Health via OVID, PubMed, Scopus, and SciELO. The NIH Quality Assessment Tool for Observational Cohort and Cross-Sectional Studies was used to evaluate the quality of the included studies, which were meta-analysed to estimate the impact of dental procedures and anxiety on children’s pain perception. A meta-regression analysis was also performed to determine the relative effect of predictors on children’s pain perception measured as mean differences on a visual analogue scale (VAS). Results: The search identified 532 articles; 53 were retrieved for full-text screening; 6 studies were included in the review; and 4 were eligible for the meta-analysis. The meta-analysis showed the types of procedures that predicted intra-operative pain, with dental extractions being the most painful (Mean VAS Difference [MD] 46.51 mm, 95% confidence interval [CI] 40.40 to 52.62 mm). The meta-regression showed that pain scores for dental extractions were significantly higher than polishing (the least painful procedure (reference category)) by VAS MD = 23.80 mm (95% CI 5.13–42.46 mm, p-value = 0.012). It also showed that highly anxious children reported significantly higher pain scores during dental procedures by a 12.31 mm MD VAS score (95% CI 5.23–19.40 mm, p-value = 0.001) compared to those with low anxiety levels. Conclusions: This systematic review demonstrates that the strongest predictors of intra-operative pain associated with paediatric dental procedures are dental extractions followed by drilling. Children with high anxiety also reported more pain for similar procedures. Tailoring interventions to reduce pain associated with paediatric dental procedures should be a priority for future research, as reducing pain can impact compliance and could reduce the need for general anaesthesia in dental treatment. Full article

Predictable results in the aesthetic treatment of anterior teeth can be obtained by resorting to the concept of dental aesthetics and, in particular, defining the ideal tooth dimensions and proportions to obtain a harmonious smile. Considering the great variety of articles dealing with the topic, and the lack of updated reviews, this narrative literature review aims to evaluate current knowledge on anterior teeth dimensions and to verify the existence and the potential applications of the anterior teeth proportioning theories (Golden Proportion, Golden Percentage, RED Proportion, and Golden Rectangle). PubMed, Embase, Cochrane Library, and Google Scholar databases were comprehensively searched using different keywords and term combinations. The research includes articles published up to June 2023, no time limits were set, and only articles in English were included. Inclusion criteria comprehended reviews, clinical studies, and in-vitro studies. A total of 66 articles were selected. Two main topics were identified: “Anterior teeth dimensions”, “Golden Proportions, Golden Percentage, RED Proportions, and Golden Rectangle”. As far as tooth dimensions are concerned, different width ranges are recognized for men and women and for different ethnic groups. Perfectly symmetric contralateral elements are found in low percentages of subjects. The correlation between dental dimensions and facial parameters is not always present, and it strongly depends on the sample’s ethnicity and gender. Ideal tooth proportions were only partially identified. Full article

The current digital dentistry workflow has streamlined dental restoration production, but the effectiveness of digital virtual design and 3D printing for restorations still needs evaluation. This study explores the impact of model-free digital design and 3D-printing placement angles on restorations, including single crowns and long bridges produced with and without casts. The restorations are 3D printed using resin at placement angles of 0°, 60°, and 90°. Each group of samples was replicated ten times, resulting in a total of 120 restorations. The Root Mean Square Error (RMSE) value was used to evaluate the surface integrity of the restoration. In addition, the contact space, edge gap, and occlusal space of restorations produced by different processes were recorded. The results indicate that there was no significant difference in the RMSE value of the crown group (p > 0.05). Changing the bridge restoration angle from 0° to 90° resulted in RMSE values increasing by 2.02 times (without casts) and 2.39 times (with casts). Furthermore, the marginal gaps in the crown group were all less than 60 μm, indicating good adaptation. In contrast, the bridge group showed a significant increase in marginal gaps at higher placement angles (p > 0.05). Based on the findings, virtual fabrication without casts does not compromise the accuracy of dental restorations. When the position of the long bridge exceeds 60 degrees, the error will increase. Therefore, designs without casts and parallel placement result in higher accuracy for dental restorations. Full article

Purpose. This narrative review aims to provide an overview of the mechanisms of 3D printing, the dental materials relevant to each mechanism, and the possible applications of these materials within different areas of dentistry. Methods. Subtopics within 3D printing technology in dentistry were identified and divided among five reviewers. Electronic searches of the Medline (PubMed) database were performed with the following search keywords: 3D printing, digital light processing, stereolithography, digital dentistry, dental materials, and a combination of the keywords. For this review, only studies or review papers investigating 3D printing technology for dental or medical applications were included. Due to the nature of this review, no formal evidence-based quality assessment was performed, and the search was limited to the English language without further restrictions. Results. A total of 64 articles were included. The significant applications, applied materials, limitations, and future directions of 3D printing technology were reviewed. Subtopics include the chronological evolution of 3D printing technology, the mechanisms of 3D printing technologies along with different printable materials with unique biomechanical properties, and the wide range of applications for 3D printing in dentistry. Conclusions: This review article gives an overview of the history and evolution of 3D printing technology, as well as its associated advantages and disadvantages. Current 3D printing technologies include stereolithography, digital light processing, fused deposition modeling, selective laser sintering/melting, photopolymer jetting, powder binder, and 3D laser bioprinting. The main categories of 3D printing materials are polymers, metals, and ceramics. Despite limitations in printing accuracy and quality, 3D printing technology is now able to offer us a wide variety of potential applications in different fields of dentistry, including prosthodontics, implantology, oral and maxillofacial, orthodontics, endodontics, and periodontics. Understanding the existing spectrum of 3D printing applications in dentistry will serve to further expand its use in the dental field. Three-dimensional printing technology has brought about a paradigm shift in the delivery of clinical care in medicine and dentistry. The clinical use of 3D printing has created versatile applications which streamline our digital workflow. Technological advancements have also paved the way for the integration of new dental materials into dentistry. Full article

Objectives: Population-based studies have focused on patients’ rendering of orthodontic treatment due to their malocclusion and medical needs. However, there is a scarcity of data from national sources on the prevalence of orthodontic visits and associated patient characteristics, as well as their effect on dental health. This study evaluated the demographic differences of orthodontic patients and examined the association between orthodontics use and risk of periodontal disease and oral surgical intervention. Methods: This study used data collected from the 2019 Medical Expenditure Panel Survey. Descriptive statistics were used to evaluate socio-demographics and covariates by the use of orthodontics. Chi-square tests were used to assess demographic differences among respondents who stated whether or not they used orthodontics. Logistic regression models were then used to examine the association of orthodontics and oral health outcomes. Results: The sample size was 12,422, of which 491 respondents indicated a usage of orthodontics. There were significant differences among demographic variables (p < 0.05) that included 61.1% females, 60.8% Whites, 67.6% participants under the age of 18 years old, and a family total income of $100,000 or more (52.7%). After controlling for socio-demographics and covariates, individuals who used orthodontics were less likely to have periodontal disease (AOR = 0.623, 95% CI = 0.610 to 0.637) and tooth extractions (AOR = 0.071, 95% CI = 0.070 to 0.073) than those who did not. Conclusions: Our findings indicate orthodontics usage was higher in females, younger patients, and Whites, highlighting the possible demographic disparities in orthodontics use. Additionally, those who used orthodontics were less likely to have oral health issues. Full article

The aim of this study was to investigate the effect of laser irradiation to computer-aided design/computer-aided fabrication (CAD/CAM) resin blocks coated with a silane coupling agent on the bond strength between resin blocks and composite resin. The CAD/CAM resin blocks used in this study were Cerasmart 300 (GC) and Vita Enamic (Vita); they were cut into plates and then subjected to a series of treatments. After processing with a silane coupling agent, treatment with a semiconductor laser was performed at 3.0, 5.0, and 7.0 W, followed by bonding procedures. The control group included those exposed to silane and bonded without laser application. After bonding, a mold with a simulated cavity was formed on the specimen and filled with flowable composite resin, and they were stored for 24 h or stressed by thermal cycling for subsequent testing that assessed the shear bond strength (n = 10). The results revealed that the bond strength was significantly enhanced by laser irradiation after applying a silane coupling agent (p < 0.03), whereas significant increase was not detected between the materials (p > 0.05). Particularly, 7 W laser irradiation had a significant increase on the bond strength between the composite resin and Cerasmart block after thermal cycling (p = 0.009). The SBS of the composite resin to CAD/CAM resin blocks was significantly enhanced by laser irradiation after silane coupling agent application. Full article

This article presents the outcomes of prosthetic oral rehabilitation using CAD/CAM telescopic bar overdentures in patients with oral cancer (n = 3), severe facial trauma (n = 2), or various syndromes (n = 1), all suffering from severe tissue deficits and requiring complex and comprehensive oral rehabilitation. The aim was to assess the durability and functionality of implant-retained prosthetic structures, ensuring easy oral hygiene and minimizing specialized follow-up needs. The data for this study were sourced from a retrospective cohort at Helsinki University Hospital. The prosthetic reconstruction encompassed the Atlantis 2in1 and the Createch removable telescopic systems. Thus, 40 implants were placed (4 to 7 per patient), with prosthetic structures in the maxilla (n = 4 patients), in the mandible (n = 1), and in both jaws (n = 1). Two patients experienced no complications, two patients had part of the acrylic resin break, and one patient experienced loosening of the bar structure. All complications associated with prosthetic structures were successfully managed, and none of the implants were lost. The follow-up time ranged from 7 to 126 months. This rehabilitation is proved to be an effective solution for patients with complex oral conditions, facilitating both functional restoration and ease of maintenance. These findings underscore the importance of individualized treatment approaches in cases of tissue deficits. Full article

European countries have become host countries for migrants and unaccompanied minors. However, many migrants arrive without identity documents. Many methods exist to estimate age; among them, several methods using dental age have been proposed. Our objective was to evaluate the accuracy of biological age determination in a multiethnic sample using dental age estimated using three methods: Nolla, Demirjian, and the London Atlas. Orthopantomograms collected for 324 patients of various ethnicities aged from 4 to 20 years old were included. Then, for each orthopantomogram, a blind trained examiner used the three methods of age estimation. For each method, the estimated mean age was greater than the real mean age (p < 0.0001). The accuracy after 18 years old with a 1-year margin was under 50%. Demirjian’s method gave a less accurate estimated age than Nolla’s method (p < 0.0001) or the London Atlas (p < 0.001). The most accurate methods were those of Nolla and the London Atlas, with average absolute deviations of 1.3 and 1.2 years, respectively. Demirjian’s method was much less accurate, with a deviation of around 2 years. The evaluated methods are unable to provide reliable information to determine if an individual is a minor. Full article

In this study, we examined the cytotoxic effects of six commercial children’s mouthrinses (designated as #1, #2, #3, #4, #5, and #6) and four commercial children’s toothpastes (designated as #1, #2, #3, and #4) on primary human neonatal melanocytes that were used as a representative model for oral melanocytes. Mouthrinses diluted directly with culture medium (1:2, 1:5, 1:10, 1:100, and 1:1000) were added to monolayers of melanocytes for 2 min, followed by 24 h recovery, after which MTS cytotoxicity assay was conducted. The extracts of each toothpaste were prepared (50% w/v), diluted in culture medium (1:2, 1:5, 1:10, 1:50, 1:100, and 1:1000), and added to cell monolayers for 2 min (standard brushing time), followed by an analysis of cell viability after 24 h. Results showed that all mouthrinses except mouthrinse #4 showed significantly greater loss of cell viability, ascribed to cetylpyridinium chloride (CPC) that induced significant cytotoxicity to melanocytes (IC₅₀ = 54.33 µM). In the case of toothpastes, the examination of cellular morphology showed that a 2 min exposure to all toothpaste extracts induced a concentration-dependent decline in cell viability, pronounced in toothpaste containing sodium lauryl sulfate (SLS) detergent. Further results suggested SLS to be the critical driver of cytotoxicity (IC₅₀ = 317.73 µM). It is noteworthy that toothpaste #1 exhibited much lower levels of cytotoxicity compared to the other three toothpastes containing SLS. Taken together, these findings suggest that the melanocytotoxicity of children’s mouthrinse (#4) and toothpaste (#1) is comparatively low. To the best of our knowledge, this is the first study to examine the impact of children’s toothpastes and mouthrinses on neonatal primary human melanocytes. Future studies to investigate these findings in a realistic scenario replicating oral cavity conditions of the presence of microbiota, pellicle layer and saliva, and other cell types are warranted. Full article

This study aimed to assess the amount of erosion during activated endodontic irrigation with either HEDP or EDTA via high-resolution micro-computed tomography. Two root canals of twenty premolars were prepared with ProTaper Next and irrigated with sodium hypochlorite. Palatal canals, which served as control groups, were sealed, while buccal canals were further irrigated with either EDTA (n = 10) or HEDP (n = 10), which served as test groups. Micro-CT was performed to measure erosion depth. For 2D and 3D measurements, non-parametric repeated ANOVA measurements and post hoc tests were performed. 2D analysis showed highly significant differences between the case groups at each position of the root (p ≤ 0.01). The cervical and apical positions showed significant differences in the EDTA group (p = 0.03). The 3D analysis also showed significant differences between both chelating agents (p < 0.01) and the case and control groups (p = 0.01). The mean erosion depths in the cervical, middle, and apical thirds of the EDTA group were 45.75, 41.79, and 32.25 µm, and for the HEDP group were 20.25, 16.40, and 15.96 µm, respectively. HEDP seems to have a significantly less erosive effect. Different irrigation protocols with harsher conditions, as might be the case during endodontic retreatment, could be assessed with micro-CT. Full article