Journal Description
Magnetism
Magnetism
is an international, peer-reviewed, open access journal on science and technology for all original researches on magnetism and related fields, published quarterly online by MDPI. The UK Magnetics Society (UKMagSoc) is affiliated with Magnetism and their members receive discounts on the article processing charges.
- Open Access— free for readers, with article processing charges (APC) paid by authors or their institutions.
- Rapid Publication: manuscripts are peer-reviewed and a first decision is provided to authors approximately 27.6 days after submission; acceptance to publication is undertaken in 15.8 days (median values for papers published in this journal in the second half of 2023).
- Recognition of Reviewers: APC discount vouchers, optional signed peer review, and reviewer names published annually in the journal.
- Magnetism is a companion journal of Electronics.
Latest Articles
Changes in Material Behavior according to the Amount of Recycled Magnetic Materials in Polymer-Bonded Magnets Based on Thermoplastics
Magnetism 2024, 4(1), 1-23; https://doi.org/10.3390/magnetism4010001 - 15 Jan 2024
Abstract
►
Show Figures
The applications of polymer-bonded magnets are increasing within drive technology mostly because of new concepts concerning the magnetic excitation of direct current (DC) or synchronous machines. To satisfy this rising demand for hard magnetic filler particles—mainly rare earth materials—in polymer-bonded magnets, a recycling
[...] Read more.
The applications of polymer-bonded magnets are increasing within drive technology mostly because of new concepts concerning the magnetic excitation of direct current (DC) or synchronous machines. To satisfy this rising demand for hard magnetic filler particles—mainly rare earth materials—in polymer-bonded magnets, a recycling strategy for thermoplastic-based bonded magnets has to be found that can be applied to polymer-bonded magnets. The most important factor for the recycling strategy is the filler material, especially when using rare earth materials, as those particles are associated with limited resources and high costs. However, thermoplastic-based bonded magnets reveal the opportunity to reuse the compound material system without separation of the filler from the matrix. Most known recycling strategies focus on sintered magnets, which leads to highly limited knowledge in terms of strategies for recycling bonded magnets. This paper illustrates the impact of different amounts of recycling material within the material system on material behavior and magnetic properties that can be achieved by taking different flow conditions and varying gating systems into account. The recycled material is generated by the mechanical reuse of shreds. We found that a supporting effect can be achieved with up to 50% recycled material in the material system, which leads to only minimal changes in the material’s behavior. Furthermore, changes in magnetic properties in terms of recycled material are affected by the gating system. To reduce the reduction in magnetic properties, the number of pin points should be as low as possible, and they should located in the middle. The filler orientation of the recycled material is minimally influenced by the outer magnetic field and, therefore, mainly follows the flow conditions. These flow conditions are likely to be affected by elastic flow proportions with increasing amounts of recycled material.
Full article
Open AccessArticle
Estimation of Iron Loss in Permanent Magnet Synchronous Motors Based on Particle Swarm Optimization and a Recurrent Neural Network
Magnetism 2023, 3(4), 327-342; https://doi.org/10.3390/magnetism3040025 - 11 Dec 2023
Abstract
The popularity of permanent magnet synchronous motors (PMSMs) has increased in recent years due to their high efficiency, compact size, and low maintenance needs. Calculating iron loss in PMSMs is crucial for designing and optimizing PMSMs to achieve high efficiency and a long
[...] Read more.
The popularity of permanent magnet synchronous motors (PMSMs) has increased in recent years due to their high efficiency, compact size, and low maintenance needs. Calculating iron loss in PMSMs is crucial for designing and optimizing PMSMs to achieve high efficiency and a long lifespan, as this can significantly affect motor performance. However, multiple factors influence the accuracy of iron loss calculations in PMSMs, including the intricate magnetic behavior of the motor under different operating conditions, as well as the influence of the motor’s dynamic behavior during the operation process. This paper proposes a method based on particle swarm optimization (PSO) and a recurrent neural network (RNN) to estimate the iron loss in PMSMs, independent of the empirical iron loss formula. This method establishes an iron loss calculation model considering high-order harmonics, rotating magnetization, and temperature factors. Accounting for the multifactor influence, the model studies the law of loss change under different magnetic flux densities, frequencies, and temperature conditions. To avoid the deviation problem caused by conventional polynomial fitting, a multilayer RNN and PSO are used to train and optimize the neural network. Iron loss in complex cases beyond the measurement range can be accurately estimated. The proposed method helps achieve a PMSM iron loss calculation model with broad applicability and high accuracy.
Full article
(This article belongs to the Special Issue Digital Twins for Magnetic Devices)
►▼
Show Figures
Figure 1
Open AccessArticle
Analytical Modelling of the Slot Opening Function
Magnetism 2023, 3(4), 308-326; https://doi.org/10.3390/magnetism3040024 - 03 Nov 2023
Abstract
►▼
Show Figures
The slot opening function, also called relative air gap permeance, is a function which, multiplied by the flux density distribution of a slotless geometry, gives the flux density distribution of a slotted configuration. Here, the magnetic field inside the air gap of a
[...] Read more.
The slot opening function, also called relative air gap permeance, is a function which, multiplied by the flux density distribution of a slotless geometry, gives the flux density distribution of a slotted configuration. Here, the magnetic field inside the air gap of a multi-slot surface facing a smooth one was studied, by solving the Laplace equation inside the air gap, in terms of a Fourier series. To obtain the Fourier coefficients, at first, the conformal mapping analytical solution of a single-slot configuration along the smooth surface, was considered. Then, the principle of superposition of the single-slot lost flux density distributions was applied to obtain the multi-slot distribution. The approach is valid in general, and in the case of interference among the flux density distributions of adjacent slots, where their mutual effect cannot be neglected. The field distributions obtained by using the proposed slot opening functions were compared with FEM simulations, showing satisfactory agreement. The numerical accuracy limits were also analysed and discussed.
Full article
Figure 1
Open AccessFeature PaperArticle
Swirling of Horizontal Skyrmions into Hopfions in Bulk Cubic Helimagnets
Magnetism 2023, 3(4), 297-307; https://doi.org/10.3390/magnetism3040023 - 19 Oct 2023
Abstract
►▼
Show Figures
Magnetic hopfions are three-dimensional topological solitons embedded into a homogeneously magnetized background. The internal structure of hopfions is distinguished by the linked preimages—closed loops with a single orientation of the magnetization on the target space —and is thus characterized by the
[...] Read more.
Magnetic hopfions are three-dimensional topological solitons embedded into a homogeneously magnetized background. The internal structure of hopfions is distinguished by the linked preimages—closed loops with a single orientation of the magnetization on the target space —and is thus characterized by the integer Hopf index . Alternatively, hopfions can be visualized as a result of the swirling of two-dimensional bimerons around the direction of an applied magnetic field. Since the bimeron consists of a circular core and an anti-skyrmion crescent, two hopfion varieties can be achieved with either bimeron constituent facing the hopfion interior. In bulk cubic helimagnets, however, the applied magnetic field leads to a spontaneous collapse of hopfions, i.e., the eigen-energy of hopfions has the minimum for zero hopfion radius R. Anti-hopfions with , in this case, pass through the intermediate toron state with two-point defects. Here, we demonstrate that the competing cubic and exchange anisotropies inherent in cubic non-centrosymmetric magnets (e.g., in the Mott insulator Cu OSeO ) as a third level of the hierarchy of energy scales following the exchange and Dzyaloshinskii–Moriya interactions, may shift the energy minimum into the region of finite hopfion radii.
Full article
Figure 1
Open AccessArticle
A Novel Analytical Formulation of the Magnetic Field Generated by Halbach Permanent Magnet Arrays
Magnetism 2023, 3(4), 280-296; https://doi.org/10.3390/magnetism3040022 - 05 Oct 2023
Abstract
►▼
Show Figures
This paper presents an analytical study of the air-gap magnetic field of a surface permanent magnet (SPM) linear, slot-less machine with a Halbach PM configuration, under the no-load condition. While other analytical formulations of the magnetic field generated by PMs are available, they
[...] Read more.
This paper presents an analytical study of the air-gap magnetic field of a surface permanent magnet (SPM) linear, slot-less machine with a Halbach PM configuration, under the no-load condition. While other analytical formulations of the magnetic field generated by PMs are available, they exhibit some drawbacks, such as only providing a Fourier series, or being suitable to determine magnetic field average values, but not local magnetic field distributions. On the contrary, the proposed approach allows the determination of a unique, closed-form formulation for the slot-less machine air-gap field. This is obtained starting from the complex expression of the magnetic field of a conductor, inside the air gap, between two parallel smooth iron surfaces, obtained by means of the method of images. The magnetic field due to an infinitesimal conductor belonging to a current sheet is then integrated along a segment, providing the expression of the magnetic field due to the corresponding linear current density distribution, for current sheets perpendicular or parallel to the iron surfaces. Any Halbach PM segment disposition can, hence, be obtained via a suitable combination of field distributions generated by couples of current sheets with perpendicular and parallel orientation. Lastly, the no-load magnetic field expression with a Halbach array of PMs is retrieved. The proposed analytical model provides an accurate representation of the magnetic field distribution produced by any Halbach array, with an arbitrary number of segments and orientations. Additionally, the results obtained from the proposed analytical expressions are compared with FEM simulations realized by commercial software, and show an excellent agreement.
Full article
Figure 1
Open AccessArticle
Zero-Pole Optimization of a Novel High-Quality-Factor Planar Helical Resonator
Magnetism 2023, 3(4), 267-279; https://doi.org/10.3390/magnetism3040021 - 28 Sep 2023
Abstract
►▼
Show Figures
A novel micro-solenoid resonator has been designed, simulated, and measured. The solenoid core consisted of a DuroidTM circuit board with a relative permittivity of 2.2. The resonator design incorporated four embedded copper vias with a radius of 125 µm and three surface
[...] Read more.
A novel micro-solenoid resonator has been designed, simulated, and measured. The solenoid core consisted of a DuroidTM circuit board with a relative permittivity of 2.2. The resonator design incorporated four embedded copper vias with a radius of 125 µm and three surface conductors to form a rectangular coil. A pitch size of 250 µm was used for a 3.02 mm thick substrate. To enhance the resonator’s performance at higher frequencies, a capacitance was introduced in series through the via. This additional capacitor effectively couples the inductance, resistance, and stray capacitance. The optimization of the quality factor was investigated through pole transfer analysis, resulting in an increased resonance frequency of 12.25 GHz and an elevated Q-factor of 306. Moreover, besides its very high Q-factor, this resonator offers a simplified design and easy integration. An analytical lumped circuit model was employed to investigate the design, and the measured S-parameters closely matched the analytical model and electromagnetic simulation results. The tuned resonator exhibited a superior quality factor compared to other micro-resonators.
Full article
Figure 1
Open AccessArticle
Two-Step Magnetic Ordering in Intercalated Niobium Dichalcogenide MnXNbS2
Magnetism 2023, 3(3), 259-266; https://doi.org/10.3390/magnetism3030020 - 04 Sep 2023
Abstract
►▼
Show Figures
Transition metal dichalcogenides are studied due to the possibility of creating nanoscale semiconductor devices, as well as fundamental issues of magnetic ordering. We researched the crystal structure and magnetic properties of niobium dichalcogenide Mn0.30NbS2. The results of the X-ray
[...] Read more.
Transition metal dichalcogenides are studied due to the possibility of creating nanoscale semiconductor devices, as well as fundamental issues of magnetic ordering. We researched the crystal structure and magnetic properties of niobium dichalcogenide Mn0.30NbS2. The results of the X-ray study showed the possible existence of an intermediate 2 a0·2 a0 structure between the “basic” superstructures. Also, two local maximums were found in the temperature dependence of the dynamic magnetic susceptibility. These features can indirectly confirm the presence of a transition superstructure and reflect the two-step nature of the magnetic ordering.
Full article
Figure 1
Open AccessReview
Review of Orbital Magnetism in Graphene-Based Moiré Materials
by
and
Magnetism 2023, 3(3), 245-258; https://doi.org/10.3390/magnetism3030019 - 28 Aug 2023
Abstract
Recent years have seen the emergence of moiré materials as an attractive platform for observing a host of novel correlated and topological phenomena. Moiré heterostructures are generated when layers of van der Waals materials are stacked such that consecutive layers are slightly mismatched
[...] Read more.
Recent years have seen the emergence of moiré materials as an attractive platform for observing a host of novel correlated and topological phenomena. Moiré heterostructures are generated when layers of van der Waals materials are stacked such that consecutive layers are slightly mismatched in their lattice orientation or unit cell size. This slight lattice mismatch gives rise to a long-wavelength moiré pattern that modulates the electronic structure and leads to novel physics. The moiré superlattice results in flat superlattice bands, electron–electron interactions and non-trivial topology that have led to the observation of superconductivity, the quantum anomalous Hall effect and orbital magnetization, among other interesting properties. This review focuses on the experimental observation and theoretical analysis of orbital magnetism in moiré materials. These systems are novel in their ability to host magnetism that is dominated by the orbital magnetic moment of Bloch electrons. This orbital magnetic moment is easily tunable using external electric fields and carrier concentration since it originates in the quantum anomalous Hall effect. As a result, the orbital magnetism found in moiré superlattices can be highly attractive for a wide array of applications including spintronics, ultra-low-power magnetic memories, spin-based neuromorphic computing and quantum information technology.
Full article
(This article belongs to the Special Issue Topological Spin Textures and Their Applications)
►▼
Show Figures
Figure 1
Open AccessArticle
Correlation between the Material System and the Magnetic Properties in Thermoset-Based Multipolar Ring Magnets
by
and
Magnetism 2023, 3(3), 226-244; https://doi.org/10.3390/magnetism3030018 - 14 Aug 2023
Abstract
►▼
Show Figures
Multipolar bonded magnets based on thermosets offer the opportunity to expand the applications of bonded magnets with respect to an increasing chemical and thermal resistance compared to thermoplastics. To utilise this option, the correlation between the material system and the magnetic properties must
[...] Read more.
Multipolar bonded magnets based on thermosets offer the opportunity to expand the applications of bonded magnets with respect to an increasing chemical and thermal resistance compared to thermoplastics. To utilise this option, the correlation between the material system and the magnetic properties must be explored amongst other influencing factors. This paper investigates the magnetic properties and the orientation of thermoset- (epoxy resin and phenolic resin) based bonded ring magnets with a hard magnetic filler of strontium-ferrite-oxide. The influence of the matrix material and the filler grade on the magnetic properties is correlated with the material characterisation showing a high impact of the embedding of the fillers into the matrix on the orientation and with that the magnetic properties. Based on a network theory, it can be justified that the magnetic properties can be increased due to a phenolic resin and a high filler grade. Further, it was shown that the orientation along the sample depth is highly affected by the strength of the outer magnetic field and limited in terms of the high-tool temperature in a thermoset-based production. With that, the sample depth, which reveals a proper orientation, is restricted so far.
Full article
Graphical abstract
Open AccessArticle
Ab Initio Characterization of Magnetoelectric Coupling in Fe/BaTiO3, Fe/SrTiO3, Co/BaTiO3 and Co/SrTiO3 Heterostructures
Magnetism 2023, 3(3), 215-225; https://doi.org/10.3390/magnetism3030017 - 31 Jul 2023
Cited by 1
Abstract
►▼
Show Figures
Magneto-electric coupling is a desirable property for a material used in modern electronic devices to possess due to the favorable possibilities of tuning the electronic properties using a magnetic field and vice versa. However, such materials are rare in nature. That is why
[...] Read more.
Magneto-electric coupling is a desirable property for a material used in modern electronic devices to possess due to the favorable possibilities of tuning the electronic properties using a magnetic field and vice versa. However, such materials are rare in nature. That is why the so-called superlattice approach to creating such materials is receiving so much attention. In the superlattice approach, the functionality of a combined heterostructure depends on the interacting components and can be adjusted depending on the desired property. In the present paper, we present supercells of ferromagnetic thin films of Fe and Co deposited on ferroelectric and piezoelectric substrates of BaTiO3 and SrTiO3 that exhibit magnetism, ferroelectric polarization and piezoelectric effects. Within the structures under investigation, magnetic moments can be tuned by an external electric field via the ferroelectric dipoles. We investigate the effect of magnetoelectric coupling by means of ab initio spin-polarized and spin–orbit calculations. We study the structural, electronic and magnetic properties of heterostructures, and show that electrostriction can reduce the magnitude of the magnetization vector of a ferromagnet. This approach can become the basis for controlling the properties of one of the ferromagnetic layers of a superconducting spin valve, and thus the superconducting properties of the valve.
Full article
Figure 1
Open AccessArticle
Investigation of the Features of a Superconducting Spin Valve Fe1/Cu/Fe2/Cu/Pb on a Piezoelectric PMN–PT Substrate
by
, , , , , and
Magnetism 2023, 3(3), 204-214; https://doi.org/10.3390/magnetism3030016 - 13 Jul 2023
Abstract
►▼
Show Figures
The properties of a superconducting spin valve Fe1/Cu/Fe2/Cu/Pb on a piezoelectric PMN–PT substrate ([Pb(Mg1/3Nb2/3)O3]0.7–[PbTiO3]0.3) in electric and magnetic fields have been studied. The magnitude of the shift of the superconducting transition
[...] Read more.
The properties of a superconducting spin valve Fe1/Cu/Fe2/Cu/Pb on a piezoelectric PMN–PT substrate ([Pb(Mg1/3Nb2/3)O3]0.7–[PbTiO3]0.3) in electric and magnetic fields have been studied. The magnitude of the shift of the superconducting transition temperature in the magnetic field H = 1 kOe equal to 150 mK was detected, while the full superconducting spin valve effect was demonstrated. Abnormal behavior of the superconducting transition temperature was observed, which manifests itself in the maximum values of the superconducting transition temperature with the orthogonal orientation of the magnetization vectors of ferromagnetic layers. This may indirectly indicate the formation of the easy axis of the magnetization vector of the Fe1-layer adjacent to the piezoelectric substrate PMN–PT. It was found that with an increase in the magnitude of the applied electric field to the PMN–PT substrate, the shift in the superconducting transition temperature of the Fe1/Cu/Fe2/Cu/Pb heterostructure increases. The maximum shift was 10 mK in an electric field of 1 kV/cm. Thus, it has been shown for the first time that a piezoelectric superconducting spin valve can function.
Full article
Graphical abstract
Open AccessReview
Magnetic Field as an Important Tool in Exploring the Strongly Correlated Fermi Systems and Their Particle–Hole and Time-Reversal Asymmetries
Magnetism 2023, 3(3), 180-203; https://doi.org/10.3390/magnetism3030015 - 29 Jun 2023
Cited by 1
Abstract
►▼
Show Figures
In this review, we consider the impact of magnetic field on the properties of strongly correlated heavy-fermion compounds such as heavy-fermion metals and frustrated insulators with quantum spin liquid. Magnetic field B can be considered a universal tool, allowing the exploration of the
[...] Read more.
In this review, we consider the impact of magnetic field on the properties of strongly correlated heavy-fermion compounds such as heavy-fermion metals and frustrated insulators with quantum spin liquid. Magnetic field B can be considered a universal tool, allowing the exploration of the physics controlling the remarkable properties of heavy-fermion compounds. These vivid properties are scaling, exhibited under the application of magnetic field B and at fixed temperature T, and the emergence of Landau Fermi liquid behavior under the application of magnetic field. We analyze the influence of quasiparticle–hole asymmetry on the properties of heavy-fermion (HF) compounds such as the universal scaling behavior of the thermopower exhibited under the application of magnetic field B. We show that universal scaling is demonstrated by different HF compounds such as - , , and strongly correlated layered cobalt oxide . Analyzing , we show that the scaling behavior of is violated at the antiferromagnetic phase (AF) transition. The residual resistivity and the density of states experience jumps at the AF transition, causing two jumps in the thermopower and its sign reversal. Our consideration is based on the flattening of the single-particle spectrum that strongly affects and and leads to the violation of particle–hole symmetry. The particle–hole asymmetry generates the asymmetrical part of tunneling differential conductivity , , where V is the voltage bias. We demonstrate that in the presence of magnetic field, the quasiparticle–hole asymmetry vanishes, the LFL behavior is restored, and the asymmetry disappears. Our calculations of the mentioned properties of HF compounds, based on the fermion condensation theory, are in good agreement with the experiment and support our conclusion that the fermion condensation theory is capable of describing the properties of HF compounds, including those exhibited under the application of magnetic field.
Full article
Figure 1
Open AccessFeature PaperArticle
Determination of the Magnetic Intermediate Permeability of Special Materials Based on FEM-Simulation and Hall-Sensor Measurement
by
and
Magnetism 2023, 3(2), 169-179; https://doi.org/10.3390/magnetism3020014 - 19 Jun 2023
Abstract
►▼
Show Figures
This document presents the process flow and the experimental conditions for calculating the static magnetic intermediate permeability of a specimen with a dedicated geometrical contour and surface for simulation parameter of metal detection systems. In this case, intermediate is explained and defined as
[...] Read more.
This document presents the process flow and the experimental conditions for calculating the static magnetic intermediate permeability of a specimen with a dedicated geometrical contour and surface for simulation parameter of metal detection systems. In this case, intermediate is explained and defined as probes with a magnetic permeability between 10 and 1000. An analysis of recent and current measurement standards as well as similar simulation principles leads to the contribution value of this new hybrid process flow. To calculate the permeability value in a first step, an electromagnetic circuit was constructed and excited with a defined electrical DC current with a dedicated tolerance for generating a static approximated homogenic magnetic field in a defined air gap space sector. Additionally, to the H-field generation part double copper coil, two magnetic ferrite cylinders with known permeability were used. The electrical and magnetic circuit has been modeled by an Ansys FEM Electronic Desktop software; the solver is magnetic static. Specifically, the simulated magnetic field distribution of the airgap was evaluated by using different Hall sensor elements with different tolerances. Subsequently, the electromagnetic circuit was expanded by implementing different cylindrical and cube shaped probes on a defined position inside the air gap sector with homogenic magnetization. Moreover, based on the analysis of the air gap structure without the probes, a detailed 3D-FEM model of the air gap magnetic field with special probes was established, which provides the environmental field distribution of the probes. The simulation models were compared with the corresponding Hall sensor measurements, which proved the high accuracy experimental validity of the models established in this paper. Finally, some key features related to parameter variations in the electromagnetic circuit were extracted, which can significantly reflect the characteristics of the robustness of the measurement principle. The main findings reported in this paper will be beneficial for magnetic parameter settings in electromagnetic simulation.
Full article
Graphical abstract
Open AccessCommunication
Effect of Laminated Core Body Size on Motor Magnetic Properties
by
Magnetism 2023, 3(2), 158-168; https://doi.org/10.3390/magnetism3020013 - 06 Jun 2023
Abstract
►▼
Show Figures
The magnetic characteristics of electromagnetic steel sheets used for motors are evaluated under ideal sinusoidal excitation. However, in actual equipment driving, excitation by pulse-width modulation (PWM) waves is the mainstream method. Therefore, it is necessary to clarify how the magnetic properties used in
[...] Read more.
The magnetic characteristics of electromagnetic steel sheets used for motors are evaluated under ideal sinusoidal excitation. However, in actual equipment driving, excitation by pulse-width modulation (PWM) waves is the mainstream method. Therefore, it is necessary to clarify how the magnetic properties used in motors are changed by sinusoidal excitation and inverter excitation. To clarify the magnetic properties of the laminated core by inverter excitation, samples with different core sizes were prepared and the effects on the magnetic properties were then investigated. The magnetic properties were measured by changing only the input voltage VDC while maintaining the carrier frequency and modulation factor constant. As the results, the iron loss values of the small, medium, and large samples with inverter excitation were 6.05, 9.58, and 11.62 W/kg, respectively. The iron losses of the small, medium, and large toroidal cores with inverter excitation increased by 124.9, 256.1, and 332.0%, respectively, compared with the iron loss of each toroidal core with sinusoidal excitation. The larger the body, the higher the required voltage and iron loss. It can be inferred that a larger amount of energy was required to excite a larger toroidal core. This was because the change in magnetic flux density per unit time of the large toroidal core was greater than that of other cores. This indicates that the large toroidal core generated larger eddy currents than other cores. Therefore, it is possible to say that large toroidal cores generate greater eddy current losses than other cores.
Full article
Figure 1
Open AccessArticle
Hydromagnetic Waves in Cold Nuclear Matter
Magnetism 2023, 3(2), 148-157; https://doi.org/10.3390/magnetism3020012 - 29 May 2023
Abstract
►▼
Show Figures
I consider a proton–neutron fluid mixture placed in an ultra-strong external static magnetic field and derive the spin-independent, small-amplitude disturbances in infinitely extended systems. As a theoretical framework I adopt a hydrodynamical model for the proton and neutron fluids moving in a Skyrme
[...] Read more.
I consider a proton–neutron fluid mixture placed in an ultra-strong external static magnetic field and derive the spin-independent, small-amplitude disturbances in infinitely extended systems. As a theoretical framework I adopt a hydrodynamical model for the proton and neutron fluids moving in a Skyrme mean-field derived from the time-dependent Hartree Fock formulation of the many-body nuclear problem. From the mass, momentum balance, and Maxwell equations, I set up a system of equations governing the electromagnetic field and the continuum-mechanical fields of the mixture. Next, the hydromagnetic equations are linearized, and the occurrence of small-amplitude distortions of the velocity field is analyzed for various orientations of the constant external magnetic induction with respect to the wave propagation vector. The derivation of the above equations is carried out for the inviscid case.
Full article
Figure 1
Open AccessArticle
Assessment of Geomagnetically Induced Currents Impact on Power Grid Modelling
Magnetism 2023, 3(2), 135-147; https://doi.org/10.3390/magnetism3020011 - 15 May 2023
Cited by 1
Abstract
►▼
Show Figures
Recent history demonstrates that threat has no borders, though risk does, due to national and regional differences in vulnerabilities and exposure landscapes. The difference between well and poorly managed threat is striking. Inequalities in preparing for threats as a function of their type
[...] Read more.
Recent history demonstrates that threat has no borders, though risk does, due to national and regional differences in vulnerabilities and exposure landscapes. The difference between well and poorly managed threat is striking. Inequalities in preparing for threats as a function of their type are still apparent. Compared to more concerning electromagnetic interference threats, the impact of geomagnetic disturbance (GMD) on power grid operation is not well studied. The need for detailed research of GMD negative impacts is expected to broaden awareness. The amplitude of geomagnetically induced currents (GICs) is treated as a uniform measure of danger that can be processed by various stakeholders. Hence, methods for increasing the accuracy of GIC representation are presented in this paper. A low-entropy signal is defined and it is shown that the feature of low signal entropy can be used for increasing the accuracy of the measurement equipment. At the end, a full-system view of GMD impact on power grid operation is given.
Full article
Figure 1
Open AccessArticle
Loss Mitigation in Self-Biased Microstrip Circulators
Magnetism 2023, 3(2), 121-134; https://doi.org/10.3390/magnetism3020010 - 04 May 2023
Abstract
Integration of the ferrite devices in the RF front-end and active antennas is hindered by the need for external magnets, biasing soft microwave ferrites. The hexaferrite-based self-biased nonreciprocal devices can operate without external magnets at mm-wave frequencies but the currently available hexaferrite materials
[...] Read more.
Integration of the ferrite devices in the RF front-end and active antennas is hindered by the need for external magnets, biasing soft microwave ferrites. The hexaferrite-based self-biased nonreciprocal devices can operate without external magnets at mm-wave frequencies but the currently available hexaferrite materials inflict high RF losses at lower frequencies, particularly in the wireless communication bands. In this paper, the parameters of La-Co-substituted hexaferrite compounds are used for the self-biased circulators in the low GHz frequency bands, and a means of the dissipation loss reduction are discussed.
Full article
(This article belongs to the Special Issue Mathematical Modelling and Physical Applications of Magnetic Systems)
►▼
Show Figures
Figure 1
Open AccessArticle
On the Modernisation of Weber’s Electrodynamics
Magnetism 2023, 3(2), 102-120; https://doi.org/10.3390/magnetism3020009 - 25 Apr 2023
Cited by 1
Abstract
►▼
Show Figures
This work is an attempt to modernise Weber’s electrodynamics to make it compatible with the high-velocity regime, and with the existence of a limiting velocity, c. For this purpose, starting from the law of energy conservation and the mass–energy equivalence, new expressions
[...] Read more.
This work is an attempt to modernise Weber’s electrodynamics to make it compatible with the high-velocity regime, and with the existence of a limiting velocity, c. For this purpose, starting from the law of energy conservation and the mass–energy equivalence, new expressions for potential energy and for kinetic energy are derived jointly which are consistent with an ultimate velocity of the value of c. The new potential energy, already reported by Phipps, becomes Weber’s expression in the limit of low velocities. The new kinetic energy differs from the relativistic expression, but, like the latter, it also becomes the Newtonian expression in the limit of low velocities. New expressions for force and linear momentum are also derived which complete a new mechanics. Phipps’ potential energy and new kinetic energy are applied to the problem of two interacting charges in a radial motion and orbital motion. The new framework is also applied to the problem of a charge moving between the two plates of a charged capacitor, obtaining a result similar to that obtained by means of Maxwell–Lorentz electromagnetism and relativistic mechanics. The metaphysical considerations that clearly differentiate the conventional framework from the new framework proposed here are discussed.
Full article
Figure 1
Open AccessFeature PaperArticle
Influence of Hydrogen Reduction Stage Conditions on the Microwave Properties of Fine Iron Powders Obtained via a Spray-Pyrolysis Technique
by
, , , , , and
Magnetism 2023, 3(2), 90-101; https://doi.org/10.3390/magnetism3020008 - 23 Apr 2023
Abstract
The relationship between the chemical purity of one-size particles and microwave properties in ferromagnetic materials is not clearly studied. Ferromagnetic nanostructured iron powders were synthesized from iron nitrate solution using ultrasonic spray-pyrolysis and then reduced in H2 flow at 350, 400, 450,
[...] Read more.
The relationship between the chemical purity of one-size particles and microwave properties in ferromagnetic materials is not clearly studied. Ferromagnetic nanostructured iron powders were synthesized from iron nitrate solution using ultrasonic spray-pyrolysis and then reduced in H2 flow at 350, 400, 450, and 500 °C. A rise in the concentration of solutions of a precursor from 10 to 20 wt. % led to an increase in mean particle size. The interrelationship was studied between chemical composition and the microwave dispersion of the powders obtained. An increase in the temperature of reduction changes the chemical composition and increases the amplitude of complex microwave permeability, which was studied using solid-state physics methods (XRD, STA, SEM, and VNA). It was found that annealing at 400 °C is the optimal treatment that allows the production of iron powders, consisting of about 90% of α-Fe phase, possessing a particle surface with low roughness and porosity, and demonstrating intense microwave absorption. Annealing at a higher temperature (500 °C) causes an even higher increase in permeability but leads to the destruction of nanostructured spheres into smaller particles due to grain growth. This destruction causes an abrupt increase in permittivity and therefore significantly reduces potential applications of the product. The insight into chemical–magnetic relationships of these materials enhances the data for design applications in magnetic field sensing.
Full article
(This article belongs to the Special Issue Magnetic Surfaces: Thin Films and Nanostructures)
►▼
Show Figures
Figure 1
Open AccessFeature PaperArticle
Extension of the Application Range of Multipolar Bonded Ring Magnets by Thermosets in Comparison to Thermoplastics
by
and
Magnetism 2023, 3(1), 71-89; https://doi.org/10.3390/magnetism3010007 - 20 Mar 2023
Abstract
►▼
Show Figures
To expand the range of applications of multipolar bonded magnets based on a thermoplastic matrix, the chemical and thermal resistance has to be increased and the reduced orientation in the rapid solidified surface layer has to be overcome. To meet these requirements, the
[...] Read more.
To expand the range of applications of multipolar bonded magnets based on a thermoplastic matrix, the chemical and thermal resistance has to be increased and the reduced orientation in the rapid solidified surface layer has to be overcome. To meet these requirements, the matrix of multipolar bonded magnets can be based on thermosets. This paper investigates in the magnetic properties, especially in the orientation of hard magnetic fillers, the pole accuracy and the mechanical properties of multipolar bonded ring magnets based on the hard magnetic filler strontium-ferrite-oxide and compares the possibilities of thermoplastic (polyamide)- and thermoset (epoxy resin, phenolic resin)-based matrices. It was shown that the magnetic potential of the thermoset-based material can only be fully used with further magnetization. However, the magnetic properties can be increased using thermoset-based compounds compared to thermoplastics in multipolar bonded ring magnets. Further, a model of the orientation and pole accuracy is found in terms of thermoset-based multipolar magnets. In addition, the change of the mechanical properties due to the different matrix systems was shown, with an increase in E-Modulus, Et, and a reduction in tensile strength, σm, and elongation at break, εm, in terms of thermosets compared to thermoplastics.
Full article
Figure 1
Highly Accessed Articles
Latest Books
E-Mail Alert
News
Topics
Conferences
Special Issues
Special Issue in
Magnetism
Magnetic Shielding for Electromagnetic Compatibility Applications
Guest Editors: Gang Zhang, Alistair DuffyDeadline: 31 May 2024
Special Issue in
Magnetism
Mathematical Modelling and Physical Applications of Magnetic Systems
Guest Editors: Roberto Zivieri, Giancarlo Consolo, Israa MedlejDeadline: 30 September 2024
Special Issue in
Magnetism
Exclusive Collection: Papers from the Editorial Board Members of Magnetism
Guest Editor: Gerardo F. GoyaDeadline: 31 December 2024