Search Results (47)

The utilization of plasmonic nanomaterials in catalytic technologies is an emerging research field with foreseeable applications in energy-catalytic technologies. On this front, the coupling of plasmonic nanomaterials with molecular catalysts is a newly approached, thus far unexploited field, that we discuss herein. In the present mini review, we contrast the case where the plasmonic particle itself is the catalytic center against the case where the plasmonic particle acts as a co-catalyst for an operational catalytic system. In the first part, we present an outline of the key phenomena in nanoplasmonics, and their potential implications in catalytic processes. The concepts of hot electrons, hot holes, and the dynamics of their generation and transfer are reviewed, as are the contribution of near-field and photothermal effects to catalytic processes. All these plasmonic-phenomena are then discussed in conjunction with representative catalytic systems from the literature. Full article

Future electronics will play a more critical role in people’s lives, as reflected in the realization of advanced human–machine interfaces, disease detection, medical treatment, and health monitoring. The current electronic products are rigid, non-degradable, and cannot repair themselves. Meanwhile, the human body is soft, dynamic, stretchable, degradable, and self-healing. Consequently, it is valuable to develop new electronic materials with skin-like properties that include stretchability, inhibition of invasive reactions, self-healing, long-term durability, and biodegradability. These demands have driven the development of a new generation of electronic materials with high-electrical performance and skin-like properties, among which e-polymers are increasingly being more extensively investigated. This review focuses on recent advances in synthesizing e-polymers and their applications in biointerfaces and organisms. Discussions include the synthesis and properties of e-polymers, the interrelationships between engineered material structures and human interfaces, and the application of implantable and wearable systems for sensors and energy harvesters. The final section summarizes the challenges and future opportunities in the evolving materials and biomedical research field. Full article

The coupling of pyroelectricity, semiconductor, and optical excitation yields the pyro-phototronic effect, which has been extensively utilized in photodetectors. It can also enhance the performance of light energy harvesting nanogenerators. In this work, a pyro-phototronic effect-enhanced MXene/ZnO heterojunction nanogenerator has been successfully demonstrated, which can harvest broadband light energy (from deep UV to near-infrared) and still operate at 200 °C. The morphology of the ZnO layer and the MXene layer’s thickness have been further optimized for better light energy harvesting performance. For the optimized heterojunction nanogenerator, the responsivity can be improved from ~0.2 mA/W to ~3.5 mA/W by pyro-phototronic effect, under 0.0974 mW/cm² 365 nm UV illumination. Moreover, the coupling of pyro-phototronic and piezo-phototronic effects in MXene/ZnO heterojunction nanogenerators has been investigated. The results indicate that only a small tensile strain could improve the nanogenerator’s performance. The working mechanisms have been carefully analyzed, and the modulation of piezoelectric charges on the Schottky barrier height is found to be the key factor. These results demonstrate the enormous potential of the pyro-phototronic effect in light energy harvesting nanogenerators and illustrate the coupling of pyro-phototronic and piezo-phototronic effects for further performance improvement. Full article

The surface chemistry of cesium lead halide perovskite nanocrystals has been elaborately studied in recent years and has proved the critical role of carboxylic acids and amines in the formation and stability of the nanocrystals. Specifically, a slight change in the concentration and ratio of the frequently used oleic acid and oleylamine critically influences the resultant phase and physical properties. Thus, understanding the delicate surface of cesium lead halide perovskite nanocrystals mainly relies on chemical bonding and the dynamic ligand environment of these two organic species. In this aspect, this review summarizes experimental findings about the critical role of oleic acid and oleylamine on the nucleation, growth, stability, phase, and morphology of cesium lead halide perovskite nanocrystals and their effect under different circumstances. Full article

With the global energy shortages, sustainable energy scavenging from the natural environment is desperately needed. Unlike solar cell or wind power, which depends heavily on weather conditions, triboelectric nanogenerator (TENG) has received extensive attention as an efficient all–weather energy–harvesting technology. Based on the coupling principle of contact electrification (CE) and electrostatic induction, conventional TENGs convert mechanical energy into an alternating current (AC) output. However, the typically distributed sensor systems in the ubiquitous Internet of Things (IoTs) request a direct current (DC) input. Direct current triboelectric nanogenerators (DC-TENGs) with the constant output characteristic are critical to satisfy the above requirements. Here, DC-TENGs were reviewed from the perspective of material selections. As device performance is mainly determined by material properties, the development of DC-TENGs could be divided into three categories based on dielectric materials, semiconductor materials, and materials for iontronic rectifications. The operating mechanism and influencing factors of various types of DC-TENG were summarized, representative applications were demonstrated, and the main challenges of future developments were also discussed. Full article

Collecting ambient energy to power various wearable electronics is considered a prospective approach to addressing their energy consumption. Mechanical and thermal energies are abundantly available in the environment and can be efficiently converted into electricity based on different physical effects. Hydrogel-based energy harvesters have turned out to be a promising solution, owing to their unique properties including flexibility and biocompatibility. In this review, we provide a concise overview of the methods and achievements in hydrogel-based energy harvesters, including triboelectric nanogenerators, piezoelectric nanogenerators, and thermoelectric generators, demonstrating their applications in power generation, such as LED lighting and capacitor charging. Furthermore, we specifically focus on their applications in self-powered wearables, such as detecting human motion/respiration states, monitoring joint flexion, promoting wound healing, and recording temperature. In addition, we discuss the progress in the sensing applications of hydrogel-based self-powered electronics by hybridizing multiple energy conversion in the field of wearables. This review analyzes hydrogel-based energy harvesters and their applications in self-powered sensing for wearable devices, with the aim of stimulating ongoing advancements in the field of smart sensors and intelligent electronics. Full article

In recent years, the development of the Internet of Things has challenged traditional energy supply methods. Suddenly rising maintenance costs and serious environmental pollution have led to great concern over energy supply methods such as wired transmission and batteries. Fluid energy is a kind of clean energy widely existing in nature, which can effectively reduce costs and environmental pollution. In the field of collecting fluid energy, fluid energy converters based on triboelectric nanogenerators (FEC-TENGs) have always been a research hotspot. This paper reviews the latest research progress of FEC-TENGs. Firstly, the basic working principle and working mode of FEC-TENGs are introduced. Then, the theoretical process and application examples of converting fluid energy into electrical energy or electrical signals are analyzed in detail. According to the calculation process of energy conversion efficiency and the performance evaluation parameters, the structural design, performance output, and application fields of FEC-TENGs are summarized. Finally, this paper points out the challenges and shortcomings of the current FEC-TENGs and provides our views on the future development of this field. Full article

Backpack transportation is everywhere in daily life. Suspended-load backpacks (SUSBs) based on forced vibration have attracted lots of attention because of their ability to effectively reduce the cost on the body during motion. The smaller the natural frequency of SUSBs, the better the cost reduction. The natural frequency is determined by the elastic components of SUSBs. It is currently common to use rubber ropes and pulleys as elastic components. In the first part of this paper, we propose a pre-compression design for SUSBs, which has a simple structure and breaks through the limitation of rubber material. To make the natural frequency small enough, rubber ropes and compression springs require sufficient space. This leads to the current SUSBs being large and, therefore, not suitable for children to carry. Inspired by biology, here we propose a new design strategy of pre-rotation with pre-rotation spiral springs as elastic components. The pre-rotation design not only has the advantages of avoiding the inconvenience of material aging and the ability to adjust the downward sliding distance of the backpack but also greatly saves the space occupied by the elastic components, which can be adopted by small SUSBs. We have developed a theoretical model of the pre-rotation SUSBs and experimentally confirmed the performance of the pre-rotation SUSBs. This work provides a unique design approach for small SUSBs and small suspended-load devices. And the relative motion between the components inside the SUSB has a huge potential to be used by triboelectric nanogenerators for energy scavenging. Full article

Backpack transportation is commonly used in daily life. Reducing the cost of the backpack on the human body is a widely researched subject. Suspended-load backpacks (SUSBs) based on forced vibration can effectively reduce the cost during movement. The intrinsic frequency of the SUSB is determined by the elastic components of the SUSB. Previous researchers used pulleys and rubber ropes as the elastic components. We propose a pre-compression design strategy based on pre-compression springs. Compared with previous studies, the use of pre-compression springs as elastic elements improves the reliability of the SUSB structure, avoids the inconvenience of nonlinearity and material aging, and adds the ability to flexibly adjust the sliding distance of the backpack. Moreover, previous studies utilized the relative motion between the carrying part and the backpack part to scavenge the vibration energy. We propose that the vibration energy can also be scavenged by the relative motion between the elastic components. A theoretical model is developed for the pre-compression SUSB. We experimentally confirm the performance of the pre-compression SUSB. This work provides new design ideas for SUSBs with reduced energy costs. In Part 2, we propose a bio-inspired pre-rotation design that has the advantage of occupying less space. Full article

Triboelectric nanogenerators (TENGs) are key technologies for the Internet of Things with energy harvesting. To improve energy conversion efficiency and convert mechanical energy into electrical energy, high charge density in TENGs plays a crucial role in the design of triboelectric materials and device structures. This paper proposes mechanisms and strategies to increase TENGs’ charge density through multi-charge storage layers. We also discuss the realization of higher charge densities through material and structure design. The implementation of novel charge storage strategies holds the potential for significant improvements in charge density. Full article

As a new technology for harvesting distributed energy, the triboelectric nanogenerator (TENG) has been widely used in harvesting wind energy. However, the wind-driven TENG (WD-TENG) faces the problems of high frictional resistance and low mechanical energy conversion efficiency. Here, based on optimizing the structure of the wind turbine, a rotational double-electrode-layer WD-TENG (DEL-WD-TENG) is developed. When the rotational speed is less than 400 round per minute (rpm), the dielectric triboelectric layer rubs with the inner electrode layer under its gravity; when the rotational speed is higher than 400 rpm, the dielectric triboelectric layer rubs with the outer electrode layer under the centrifugal force. The double-electrode-layer structure avoids the energy loss caused by other forces except gravity, centrifugal, and electrostatic adsorption, which improves the mechanical energy conversion efficiency and prolongs the working life of the DEL-WD-TENG. The conversion efficiency from mechanical energy to electricity of the DEL-WD-TENG can reach 10.3%. After 7 million cycles, the transferred charge of the DEL-WD-TENG is reduced by about 5.0%, and the mass loss of dielectric triboelectric layer is only 5.6%. The DEL-WD-TENG with low frictional resistance and high energy conversion efficiency has important application prospects in wind energy harvesting and self-powered sensing systems. Full article

Zinc oxide nanowires (ZnO NWs) have gained considerable attention in the field of piezoelectricity in the past two decades. However, the impact of growth-process conditions on their dimensions and polarity, as well as the piezoelectric properties, has not been fully explored, specifically when using pulsed-liquid injection metal–organic chemical vapor deposition (PLI-MOCVD). In this study, we investigate the influence of the O₂ gas and DEZn solution flow rates on the formation process of ZnO NWs and their related piezoelectric properties. While the length and diameter of ZnO NWs were varied by adjusting the flow-rate conditions through different growth regimes limited either by the O₂ gas or DEZn reactants, their polarity was consistently Zn-polar, as revealed by piezoresponse force microscopy. Moreover, the piezoelectric coefficient of ZnO NWs exhibits a strong correlation with their length and diameter. The highest mean piezoelectric coefficient of 3.7 pm/V was measured on the ZnO NW array with the length above 800 nm and the diameter below 65 nm. These results demonstrate the ability of the PLI-MOCVD system to modify the dimensions of ZnO NWs, as well as their piezoelectric properties. Full article

Addressing the increasing development of IoT networks and the associated energy requirements, rotating triboelectric nanogenerators (R-TENGs) are proving to be strong candidates in the field of energy harvesting, as well as to that of self-powered devices and autonomous sensors. In this work, we review the theoretical framework surrounding the operating principles and key design parameters of R-TENGs, while also associating them with their output characteristics. Furthermore, we present an overview of the core designs used by the research community in energy harvesting applications, as well as variations of these designs along with explicit solutions for the engineering and optimization of the electrical output of R-TENGs. Last but not least, a comprehensive survey of the potential applications of R-TENGs outside the energy harvesting scope is provided, showcasing the working principles of the various designs and the benefits they confer for each specific scenario. Full article

Indoor organic photovoltaics (IOPVs) have attained considerable research attention as a power source for a low-power consumption self-sustainable electronic device for Internet of Things (IoT) applications. This study aims to develop an efficient cathode interfacial layer (CIL) based on a polyethyleneimine (PEIE) derivative, processed at room temperature, for the advancement of non-fullerene acceptor (NFA)-based IOPVs. Using a simple chemical reaction between polyethyleneimine and cobalt (II) chloride, we developed a 3D network-structured CIL. Through quaternary ammonium salts and chelating, metal ions act as mediators and induce metal-ion doping. An inverted device architecture with wide-bandgap and low-bandgap photo-absorber layer is utilized to understand the role of CILs under standard 1 sun and low-light or indoor light illuminations. The IOPV devices with modified CIL (Co-PEIE) having PBDB-T: IT-M and PBDB-T-2F: BTP-4F photo-absorber layers demonstrate a power conversion efficiency of 22.60% and 18.34% under 1000 lux LED lamp (2700 K) illumination conditions, respectively, whereas the IOPV devices with pristine PEIE CIL realized a poor device performance of 18.31% and 14.32% for the PBDB-T: IT-M and PBDB-T-2F: BTP-4F active layers, respectively. The poor device performance of PEIE interlayer-based IOPV under low-light conditions is the result of the significantly high leakage current and low shunt resistance that directly affect the open-circuit voltage (V_OC) and fill factor (FF). Therefore, the adjustable energy barrier and notably low leakage current exhibited by the Co-PEIE CIL have a crucial impact on mitigating losses in V_OC and FF when operating under low-light conditions. Full article

Lithium-ion batteries (LIBs) dominate the market of rechargeable power sources. To meet the increasing market demands, technology updates focus on advanced battery materials, especially cathodes, the most important component in LIBs. In this review, we provide an overview of the development of materials and processing technologies for cathodes from both academic and industrial perspectives. We briefly compared the fundamentals of cathode materials based on intercalation and conversion chemistries. We then discussed the processing of cathodes, with specific focuses on the mechanisms of a drying process and the role of the binders. Several key parameters for the development of thick electrodes were critically assessed, which may offer insights into the design of next-generation batteries. Full article