Search Results (261)

Sulphur plays a fundamental role in the biological processes of chemolithotrophic microorganisms. Due to the redox characteristics of sulphur, microorganisms use it for metabolic processes. Such is the case of the dissimilatory processes in the anaerobic respiration of reducing microorganisms. The production of electrical energy from the metabolism of native microorganisms using sulphur as substrate from inorganic mineral sources in the form of Galena (PbS) was achieved using MR mineral medium with 15% (w/v) of PbS mineral concentrate. At 400 h of growth, the highest voltage produced in an experimental unit under anaerobic conditions was 644 mV. The inoculum was composed of microorganisms with spiral morphology, and at the final stages of energy production, the only microorganism identified was Bacillus clausii. This microorganism has not been reported in bioelectrochemical systems, but it has been reported to be present in corrosive environments and reducing anoxic environments. Full article

This article presents the results of the study of the morphological composition of municipal solid waste (MSW) from the landfill of Atyrau city, and the waste’s energy characteristics and presence of microorganisms, including bacteria, fungi and viruses. This study was carried out under a government order to determine the feasibility of recycling accumulated and incoming waste into electricity and its hazard to the environment and the workers involved in handling it. At the moment, there is no MSW recycling in Kazakhstan, which has led to the accumulation of more than 125 million tons of waste with an annual increase of 5 million tons. The research included four major cities (Almaty, Shymkent, Atyrau and Astana), which were selected not only on the basis of population, but also because the cities were located in different climatic zones. Samples were collected at the city landfills: 10 samples with an average distance of 100 m from each other were collected to provide a maximum coverage of both recently received waste and long-time stored waste. The research showed that neither climatic conditions nor the population size had a significant impact on MSW density, the values of which ranged from 120.1 kg/m³ to 145.4 kg/m³, as this indicator directly depends on the quality of life. The mass of the combustible fraction ranged from 39.41% to 54.62% and was mainly represented by plastic, textile and paper waste. The average value for the four cities was 50.30%. The higher calorific value fell in the range of 24.22–30.49 MJ/kg, with an average value of 26.71 MJ/kg. Microbiological studies showed little difference in average composition regardless of climatic conditions. Thus, no sharp differences in MSW composition, its energy characteristics and microbiological composition were found. The results of this study may be useful for optimising MSW recycling and disposal processes, as well as for developing measures to reduce their negative impact on the environment and human health. Full article

In this study, we investigated the use of functionalized deep eutectic solvents (DESs) as a medium for CO₂ capture integrated with CO₂ desorption and biofixation in microalgal culture, as an approach for carbon capture, utilization, and storage (CCUS). The newly devised DES formulation—comprising choline chloride, ethylene glycol, and monoethanolamine—demonstrated a significant advancement in CO₂ absorption capacity compared with conventional solvents. Effective CO₂ desorption from the solvent was also achieved, recovering nearly 90% of the captured CO₂. We then examined the application of the functionalized DESs to promote microalgal cultivation using a Chlorella sp. strain. The experimental results indicated that microalgae exposed to DES-desorbed CO₂ exhibited heightened growth rates and enhanced biomass production, signifying the potential of DES-driven CO₂ capture for sustainable microalgal biomass cultivation. This research contributes to the growing field of CCUS strategies, offering an avenue for efficient CO₂ capture and conversion into valuable biomasses, thereby contributing to both environmental sustainability and bioresource use. Full article

This study investigates the understudied area of motivational factors influencing the rental intention of electric vehicles (EVs) within the context of their integration into urban transportation to combat air pollution and reduce carbon footprints and explores the critical factors influencing consumer behavior towards EV rental, focusing on hedonic motivation, service level, consumer habits, and willingness to pay. Utilizing multiple linear regression analysis on 302 valid samples from Texas, USA, the research identifies the significant impact of these factors on rental intention. Notably, the service level emerges as the most influential predictor while emphasizing the unique and less studied role of hedonic and personal characteristics as essential antecedents of rental intention. The findings, supplemented by a Monte Carlo simulation, reveal that these personal and motivational characteristics are pivotal in shaping rental intentions, accounting for approximately 47.2% of the variance in rental intention. The study contributes valuable insights into the EV rental market, offering theoretical implications for the EV literature and practical strategies for car rental enterprises to tap into consumer patterns effectively. Full article

Here, we describe and assess a method for reusing specific food waste to make hydrogels, which can be employed to improve the efficacy of agrochemicals and water. It represents an approach for tackling current challenges, such as food waste, water management, and pesticide optimization. Depending on the formulation, the hydrogels were created by crosslinking pectin and starch with CaCl₂ or sodium trimetaphosphate. FTIR and SEM were employed to investigate the methylation degree of the extracted pectin, as well as the surface morphology and interior structure of the hydrogels. The swelling behavior and water retention in sandy soil have been investigated. In addition to the hydrogels’ potential to control and reduce pesticide loss, the herbicide Picloram is a model compound. The results show that the hydrogels have important swelling, up to 300%, and a capacity to retain water, preserve, and increase the water content in sandy soil up to 12 days. Picloram experiments show that hydrogels can limit herbicide mobility for up to 30 days under controlled conditions. The conversion of food wastes to highly valuable materials is a promising approach to optimize the water consumption and the loss of agrochemicals regarding sustainable agriculture. Full article

Marine biomass has attracted attention as an environmentally sustainable energy source that can replace petroleum-based resources. Alginates, the main natural polysaccharides extracted from seaweeds, are used in various fields, such as food, pharmaceuticals, and chemical raw materials. Because the versatile applications of alginates depend on their physicochemical properties, which are controlled by their molecular weights, proper alginate depolymerization should be established. Previous approaches have limitations such as long reaction times and environmental issues. In this study, we report eco-friendly alginate depolymerization using hydrogen peroxide (H₂O₂)-induced oxidative decomposition and high-frequency ultrasonication. In oxidative decomposition, the depolymerization tendency depends on both the temperature and the use of iron oxide catalysts that can promote the Fenton reaction. Ultrasonication is effective in promoting selective depolymerization and ring-opening reactions. Oligo-alginates obtained through the precise molecular weight regulation of alginate offer potential applications in medical devices and platform chemicals. Full article

Alternaria alternata is a global fungal pathogen that causes symptoms such as leaf blight and seed rot resulting in economically significant yield losses in different varieties of crops. Green synthesis of nanoparticles is preferred over other methods of synthesis due to their safety, eco-friendly approach, and cost-effectiveness. Phyto-synthesis of silver nanoparticles (Ag-NPs) using seed extract of Abrus precatorious was optimized and characterized using the Box-Behnken design (BBD). Ag-NPs with a UVmax of 409.01 nm and a crystallite and particle size of 23.75 and 34.36 nm, respectively, were synthesized. In vitro anti-alternaria activity of Ag-NPs showed a concentration-dependent inhibition of the mycelia with a maximum inhibition of 54.61% at 200 ppm which was significantly different (p < 0.05) from propiconazole (1 ppm) with 100% inhibition. A scanning electron micrograph (SEM) of mycelia treated with 200 ppm of Ag-NPs showed a shrunken and shriveled mycelia while the ultrastructure of the mycelia under a transmission electron microscope (TEM) showed the alteration of the fungus cell wall and disappearance of cellular organelles compared to the control sample, while energy dispersive x-ray spectroscopy (EDX) analysis of the mycelia showed the localization of elemental Ag (0.95%) within the cell of the fungus compared to the control. The results of this study highlighted the antifungal potential of Ag-NPs against fungicide-resistant Alternaria alternata to reduce the environmental impact of synthetic fungicides. Full article

This study emphasises the growing relevance of hydrogen as a green energy source in meeting the growing need for sustainable energy solutions. It foregrounds the importance of assessing the environmental consequences of hydrogen-generating processes for their long-term viability. The article compares several hydrogen production processes in terms of scalability, cost-effectiveness, and technical improvements. It also investigates the environmental effects of each approach, considering crucial elements such as greenhouse gas emissions, water use, land needs, and waste creation. Different industrial techniques have distinct environmental consequences. While steam methane reforming is cost-effective and has a high production capacity, it is coupled with large carbon emissions. Electrolysis, a technology that uses renewable resources, is appealing but requires a lot of energy. Thermochemical and biomass gasification processes show promise for long-term hydrogen generation, but further technological advancement is required. The research investigates techniques for improving the environmental friendliness of hydrogen generation through the use of renewable energy sources. Its ultimate purpose is to offer readers a thorough awareness of the environmental effects of various hydrogen generation strategies, allowing them to make educated judgements about ecologically friendly ways. It can ease the transition to a cleaner hydrogen-powered economy by considering both technological feasibility and environmental issues, enabling a more ecologically conscious and climate-friendly energy landscape. Full article

Biopolymers obtained from renewable resources are an interesting alternative to conventional polymers obtained from fossil resources, as they are sustainable and environmentally friendly. Poly(lactic acid) (PLA) is a biodegradable aliphatic polyester produced from 100% renewable plant resources and plays a key role in the biopolymer market, and is experiencing ever-increasing use worldwide. Unfortunately, this biopolymer has some usage limitations when compared with traditional polymers; therefore, blending it with other biopolymers, such as poly(butylene succinate) (PBS), poly(butylene succinate-co-butylene adipate) (PBSA), poly(butylene adipate-co-butylene terephthalate) (PBAT) and different poly(hydroxyalkanoates) (PHA), is considered an interesting method to improve it significantly, customize its properties and extend the range of its applications. The following review highlights, in its first part, the physico-chemical and mechanical properties of PLA in comparison to the other biopolymers listed above, highlighting the various drawbacks of PLA. The second part of the review deals with recent developments, results, and perspectives in the field of PLA-based blends. Full article

Microgrids, with integrated PV systems and nonlinear loads, have grown significantly in popularity in recent years, making the evaluation of their transient behaviors in grid-connected and islanded operations paramount. This study examines a microgrid’s low-voltage ride-through (LVRT) and high-voltage ride-through (HVRT) capabilities in these operational scenarios. The microgrid’s behavior was analyzed using both electromagnetic transient (EMT) and RMS simulation methods. Two operational modes, grid-connected and islanded, were considered. A three-phase diesel generator acted as a reference machine in islanded mode. Findings highlighted distinct behaviors in the two operational modes. The EMT simulation revealed in-depth characteristics of electrical parameters, showing high-frequency oscillations more precisely than the RMS simulation. Additionally, the transient recovery times were longer in islanded mode compared to grid-connected mode. The EMT simulation offers a more detailed portrayal of transient behaviors than the RMS simulation, especially in capturing high-frequency disturbances. However, its completion time becomes significantly extended with longer simulation durations. Microgrids showcase distinct transient behaviors in grid-connected versus islanded modes, especially in LVRT and HVRT scenarios. These findings are critical for the design and operation of modern microgrids. Full article

The rapid and unprecedented expansion of the global population highlights concerns about the sufficiency of food resources to sustain this growth. This study investigates and substantiates the feasibility of renewable food resources in order to meet the nutritional requirements of consumers. Three edible aquatic weeds, helencha (Enhydra fluctuans), malancha (Alternanthera philoxeroides), and kalmi (Ipomoea aquatica), were used to produce edible paper sheets. The composition of the raw aquatic weeds and paper sheet samples was analyzed, including the proximate composition, amino acid content, minerals and heavy metal contents, and bioactive compounds. The dried raw aquatic weeds and paper sheets showed similar proximate compositions, with carbohydrates being the highest component (50.38–64.63%), followed by crude protein (15.25–19.13%), ash (9.30–15.88%), and lipid (1.55–3.43%). The raw weeds and paper sheets were rich in essential minerals like Na, Ca, and Zn with contents ranging from 27.7 mg/100 g to 30.4 mg/100 g, 126.8 mg/100 g to 489.65 mg/100 g, and 4.5 mg/100 g to 16.3 mg/100 g, respectively. Acceptable levels of heavy metals, including Ni, Pb, and Cu, were found. The paper sheets contained seven essential and eight non-essential amino acids. Among the essential amino acids, the phenylalanine content was the highest at 2735.9 mg/100 g in E. fluctuans paper sheets, followed by methionine at 2377.29 mg/100 g in the raw E. fluctuans and histidine at 1972.6 mg/100 g in E. fluctuans paper sheets. A. philoxeroides sheets showed the highest total amino acid content (16,146.81 mg/100 g), while I. aquatica showed the lowest (13,118.67 mg/100 g). The aquatic weed paper sheets were rich in bioactive compounds, and the numbers in E. fluctuans, A. philoxeroides, and I. aquatica paper sheets were 31, 33, and 40, respectively. There were no significant changes in the nutritional content of the aquatic weeds in paper sheet form compared with the raw weeds, which suggests promising prospects for their production and consumption as a source of nutrition and bioactive compounds. Full article

The rise in the Earth’s surface temperature on an annual basis has stimulated scientific and engineering interest in developing and implementing alternative energy sources. Besides cost, the main requirements for alternative energy sources are renewability and environmental friendliness. A prominent representative that allows the production of “green” energy is the conversion of solar photons into a practical energy source. Among the existing approaches in solar energy conversion, the process of photoelectrochemical (PEC) hydrogen extraction from water, which mimics natural photosynthesis, is promising. However, direct decomposition of water by sunlight is practically impossible since water is transparent to light waves longer than 190 nm. Therefore, applying a photoelectrochemical process using semiconductor materials and organic compounds is necessary. Semiconductor materials possessing appropriately positioned valence and conduction bands are vital constituents of photoelectrodes. Certain materials exhibit semiconductor characteristics that facilitate the reduction-oxidation (RedOx) reaction of water (H₂O) under specific circumstances. ZnO holds a unique position in the field of photocatalysis due to its outstanding characteristics, including remarkable electron mobility, high thermal conductivity, transparency, and more. This article offers an overview of studies exploring ZnO’s role as a photocatalyst in the generation of hydrogen from water. Full article

Though the keratin content of chicken feathers is being explored for many potential uses, the crude lipid content of the biomass significantly hinders the valorization processes. Therefore, this study explored the potential of bacteria isolated from sediment for lipolytic properties. Sediment-associated strains were evaluated for lipolytic activity on tween 80–peptone agar. The best lipolytic bacterium was used to break down the lipid content of chicken feathers. The results showed that out of six bacterial strains with variable lipolytic activity, strain TTs1 showed the largest zone of precipitate around the colony, which is why it was selected and identified as Bacillus sp. TTs1. The maximum lipase production of 1530.5 U/mL by strain TTs1 was achieved at 96 h post-fermentation, with optimal process conditions of initial pH (10), incubation temperature (45 °C), agitation speed (140 rpm), inoculum size (2% v/v) and tween 80 (10% v/v). The total free fatty acid (0.58%) was liberated from chicken feathers at a concentration of 6% (w/v). Crude fat extraction from both untreated and TTs1-pretreated chicken feathers showed fat contents of 2.1 ± 0.42% and 0.92 ± 0.13%, respectively. The findings of this study highlight the biotechnological relevance of strain TTs1 in lipase production and the sustainable delipidation of lipid-rich bioresources. Full article

Large amounts of PET bottles are used worldwide as primary packaging for numerous liquids, including water and soft drinks. In many cases, between two and eight of such bottles are bundled for transport and sales using plastic collation shrink film. This study evaluates paper-based alternatives for plastic bundling material using a life cycle assessment (LCA) of four different types of bundle packaging: LDPE shrink film, recycled Low-Density Polyethylene (rLDPE) shrink film, Ecogrip (existing paper-based bundle packaging) and Ecobundle (new paper-based bundle packaging). The study focuses on the case of bundling six bottles of 1.5 L of sparkling water. The most environmentally friendly option is identified, taking into consideration the material usage, effects on human health and effects on the biosphere. It is concluded that the new corrugated board-based bundling method (Ecobundle) is very promising. Further optimization of the design, minimization of material, improved choice of materials and improved design of the production machinery may result in a corrugated board performing even better than rLDPE shrink film in terms of the global warming potential. Full article

Per- and polyfluoroalkyl substances (PFASs) have been under intense investigation by the scientific community due to their persistence in the environment and potentially hazardous effects on living organisms. In order to tackle the presence of these compounds in water, to date, the research has been strongly focused on the evaluation of the effectiveness of different types of technologies. Considering the extreme complexity of the matter of PFASs and our relatively low knowledge in this topic, the following question arises: is the “chemical only” approach that is followed for evaluating the effectiveness of technologies for PFAS removal from water reliable enough? In this work, some limitations of the present approach are discussed, highlighting the reasons why it cannot be considered a reliable tool to correctly estimate the effectiveness of technology when referring to emerging compounds such as PFASs. Bioassays can play a key role in moving towards an integrated bio-chemical evaluation (chemical analysis and ecotoxicological evaluation), which is strongly encouraged. This represents the only way to completely characterize a water matrix and fully evaluate the impact of technologies when dealing with micropollutants in water, such as PFASs. Future research should focus on defining an optimal battery of bioassays that specifically fit to best represent changes in water quality in terms of short- and long-term impacts on living organisms. Full article